GOOL Interpreter

In the Crash games, the GOOL Interpreter is responsible for interpreting an object's executable bytecode. This bytecode instructs the interpreter to perform a specific sequence of operations that can conditionally or unconditionally alter specific characteristics of the object (ex. appearance, location, status, etc.), and should ultimately render the object according to its changing characteristics. As a result, the player observes a lively, animated, and interactive enemy, box, collectible item, or whatever other kind of in-game object it may be.

Interpretation

A single interpretation of an object's bytecode consists of the following steps:

1. Fetch the instruction at the object's program counter location
   • Read the instruction at the object's program counter location
   • Point the object's program counter to the location of the following instruction
2. Perform the operation specified by the fetched instruction
3. Continue repeating steps 1 and 2 until a suspending instruction is fetched

(A suspending instruction is typically either a RET, which marks the end of a block, or ANIF/ANIS, which change the object's current frame of animation.)

A single call to the GOOL interpreter routine with some desired object as its first argument results in a single interpretation of that object's bytecode. The GOOL bytecode interpreter routine expects an object that provides the following information:

• The location in its bytecode at which the interpreter shall begin its interpretation = object's program counter
• The location in its memory of a stack frame created for the interpretation = object's frame pointer
• The location in its memory at which the interpreter shall begin pushing the results of/popping the operands for interpreted instructions = object's stack pointer

Prior to an interpretation, each of these fields (program counter, frame pointer, stack pointer) is modified according to the object's current state [descriptor] and the type of interpretation.

Types of interpretation

Many separate interpretations of an object's bytecode can occur within a single frame. The GOOL interpreter routine can be called with the same object from up to 7 distinct locations in a single iteration of the game loop. Each of the 7 calls to the interpreter routine with that object, and thus the ensuing interpretations of its bytecode, occurs under a separate condition. The 7 interpretations are identified based on the conditions under which they occur, and are as follows:

• One that occurs at a specified rate, i.e. after a specific amount of time has elapsed since its previous occurrence. (Code Block interpretation)
• One that [always] occurs [for each frame]. (Trans Block interpretation)
• One that occurs whenever the object is sent an event and its current state specifies the location of an event service routine. (Event Block interpretation)
• One that occurs whenever the object is sent an event and: its current state does not specify an event service routine or its event service routine failed to return an event, and the event sent maps to an event handler. (Handles Block interpretation)
• One that occurs whenever the object changes state. (Head Block interpretation)
• One that occurs whenever the object changes state and its recent Trans Block interpretation was unsuccessful (*Trans Block interpretation)
• One that occurs when the object minimizes the distance during another object's query to 'find the nearest object', and the event sent for asynchronous handling (from the querying object) maps to an event handler. (*Handles Block interpretation)

Ignoring the details for now, the latter 2 types are just a Trans Block and Handles Block interpretation, respectively, although their calls cross-reference the interpreter routine from different locations. Thus, there are a total of 5 types. These 5 types are more simply viewed as 5 separate threads of execution of the object's bytecode. To demonstrate, here is the expanded game loop routine with only the calls to routines that have a descendant call to the interpreter routine:

 sub_80011FC4(levelid)
 { 
   ...	  
   C) sub_80011DD0 - Load entries and/or create universal game objects 
                     (HUD/display, Crash, Aku Aku, Shadows, Boxes, Fruit)
     1) sub_8001C6C8 - CreateObject() [called once for each object created]
     ...
   GAME LOOP:
   {
     1) Code for handling game pause/start button press
       A) If start pressed...
          i) If pause menu object does not exist....
             1) sub_8001C6C8 - CreateObject() [create pause menu object]
             ...
             else
             1) sub_80024040 - SendEvent() [destroy pause menu object]
             ...
     2) If Crash object does not exist: 
       A) sub_8002E98C - Create HUD and initialize level
          i) sub_8001C6C8 - CreateObject() [create HUD object]
          ii)sub_80026650 - Reinitialize Level
             1) sub_8001C6C8 - CreateObject() [create Crash object]
             ...
     3) Code for loading a new level if necessary
       A) If new level to load
          ...
          ii)sub_80011DD0 - Load entries and/or create universal game objects 
             1) sub_8001C6C8 - CreateObject() [called once for each object created]
             ...
     ...
     5) Spawn all objects in current zone [for those that have their respawn bit set]
       A) sub_80025928 - Spawn objects
          1) sub_8001BCC8 - SpawnObject() [called for each object spawned]
          ...
     ...
     9) Update all objects and create transformed primitives for them
       A) sub_8001D5EC - UpdateObjects()
          1) sub_8001DA0C - UpdateObject() [called for each existing object]
     ...
   } 
 }

Based on the above, consider an arbitrary frame of execution in terms of a single object. CreateObject() or SpawnObject() will not be called more than once [to create that object] in that frame; that is-the object is not created or spawned more than once, or even spawned after it is created and vice-versa. The object may not even be created/spawned in that frame because it either already exists or does not exist since the game has not requested it be created/spawned. If it is an existing object, it will also be updated only once in that frame. For a single object, the above can be reduced the following series of potential calls:

 sub_80011FC4(levelid)
 { 
   ...	  
   GAME LOOP:
   {
     ...
     CreateObject(obj,...) or SpawnObject(obj,...)
     ...
     SendEvent(src,obj,...)
     ...
     UpdateObject(obj)
   } 
 }

What the above leaves out, however, are the number of other locations at which a call to the SendEvent() routine reside. Some are located before the CreateObject or SpawnObject routine calls, some after, some within the UpdateObject routine itself, and even some within the interpreter routine, since there exist several types of GOOL instructions that allow another object to send an event to the recipient object. In fact, there is nothing preventing the object from being the recipient of more than one event sent (from potentially multiple sources) in a single frame. There may be an interpretation for each event sent to the object during that frame, and there is no limit on the number of events that can be sent. Thus, there may be many calls to SendEvent() [with the object as the recipient] in a single frame, but still only at most one call to CreateObject/SpawnObject() and UpdateObject(). Without getting too far off track, it is simply necessary to understand that each of these routines contains (or calls a routine that calls a routine that contains) a call to the interpreter routine:

 sub_80011FC4(levelid)
 { 
   ...	  
   GAME LOOP:
   {
     ...
     CreateObject(obj,...) or SpawnObject(obj,...)
       InitObject(obj, ...)
         ChangeObjectState(obj, ...)
           CreateObjectStackFrame(obj); // *create initial stack frame
           -if there is a head block to interpret for the object
             CreateObjectStackFrame(obj);
             obj->pc = obj->pchead;
             InterpretObject(obj, 0x13, &stateref); // # 1 (head block interpretation)
         
     SendEvent(src,obj,...) // there may be multiple calls to this
        -if there is an event service routine for the object (in its current state)
           CreateObjectStackFrame(obj);
           obj->pc = obj->pcevent;
           InterpretObject(obj, 0x8, &stateref);    // # 2 (event block interpretation)
        -if there is not an event service routine for the object (in its current state)
         or the event service routine failed to return an event
          -if the event maps to an event handler in the event->state/handler map
           CreateObjectStackFrame(obj);
           obj->pc = handlerlocation;
           InterpretObject(obj, 0x3, &stateref);    // # 3 (handles block interpretation)
          -else
           ChangeObjectState(obj,state,...); // *

     UpdateObject(obj)
      -if the object is able to animate
        -if there is a trans block to interpret for the object (in its current state)
           CreateObjectStackFrame(obj);
           obj->pc = obj->pctrans;
           InterpretObject(obj, 0x3, &stateref);   // # 4 (trans block interpretation)
        -if at least n ticks have elapsed, where n is given by the 'wait' operand of the 
         most recently suspending animation type instruction of the object's code block 
           InterpretObject(obj, 0x4, &stateref);   // # 5 (code block interpretation)

   } 
 }

 

Notice that immediately prior to each call [to the interpreter routine], with the exception of #5, a new stack frame is created for the object (which includes pointing its frame pointer and stack pointer, respectively, to the beginning and ending of its new frame), and its program counter is pointed to a distinct location within its bytecode. If each bytecode instruction is represented by a pseudo-instruction, a potential sequence of calls to the interpreter routine in a single frame [for only that object] might be represented by the following:

label  | address | pseudo-instruction

pcevent: 0x34      N  // call A
         0x38      N
         0x3C      S
...
pchead:   0x0      N  // call B
          0x4      N
          0x8      N
          0xC      S
...
pctrans: 0x50      N  // call C
         0x54      N
         0x58      N
         0x5C      N
         0x60      N
         0x64      N
         0x68      S
...
*pccode: 0x70      N  // call D
         0x74      N
         0x78      N
         0x7C      N
         0x80      S
...
pcevent: 0x34      N  // call E
         0x38      N
         0x3C      S
...
pcevent: 0x34      N  // call F
         0x38      N
         0x3C      S

Each call above to the interpreter routine is represented by the sequence of instructions (represented as pseudo-instructions) fetched during its interpretation. An N pseudo-instruction represents an instruction that did not suspend the interpreter, causing the next instruction in sequence to be fetched and interpreted. An S pseudo-instruction represents an instruction that did suspend the interpreter, causing the interpreter routine to end the interpretation/return to its caller. Each pseudo-instruction is listed with the address of the instruction it represents in the object's bytecode [relative to the beginning].

The first instruction fetched in each interpretation is also marked with a label; this label is given the name of the object field that points to its associated instruction. Immediately prior to each interpretation, with the exception of the one marked *pccode, the object's program counter is pointed to the location in this particular field; it is this operation that causes each interpretation to begin at the location it does. This particular object field is also primarily responsible for determining the type of interpretation:

Field	Interpretation Type
pctrans	Trans Block Interpretation
pcevent	Event Block Intepretation
pchead	Head Block Interpretation
pc	Code Block Interpretation

The pctrans, pcevent, and pchead fields each contain a pointer to/the absolute location of an individual block in the object's bytecode. These fields locate the respective entry points for 3 separate threads of interpretation for the object-a trans thread, an event thread, and a head thread. Whenever the object changes state, its pctrans and pcevent fields are modified according to the state descriptor for its new state; its pchead field is then cleared. (If the object wishes to modify its pchead field, it does so via a MOVC instruction in its bytecode.)

Whenever the object changes state, its program counter (pc field) is also set directly to the location of the code block specified by the pccode field of the state descriptor for its new state. The entirety of the object's stack contents are then unwound, or the object's stack pointer is reset to its initial location, and an initial stack frame is [re]created. This program counter location and stack configuration is then restored after each subsequent non-code block interpretation is completed. (That is-since those interpretations require the program counter value to be replaced with a new location and a new stack frame to be created, after they are completed, the original program counter location and initial stack frame are restored). When the interpretation marked #5 in the above pseudo-code (the code block interpretation) finally occurs, the object's program counter will point to its code block and its stack frame will be the initial frame. The code block interpretation is yet another thread of interpretation for the object-a code thread.

File:Goolinterp1.png

236x236px

For the sake of explanation, handles blocks are viewed as being equivalent to event blocks, so handles interpretations and threads are simply ignored. The timeline to the right shows an arbitrary frame of execution in terms of the times elapsed for the various interpretations of a single object's bytecode. Towards the beginning of the frame, the interpreter has performed a code block interpretation and a trans block interpretation for the object. Towards the end of the frame, the interpreter has performed an event block interpretation for that object, as it has been sent an event from some [unknown] source. The following timeline extends this timeline [to the right] to 6 arbitrary frames of execution:

File:Goolinterp2b.png

733x733px

The extended timeline makes it clear that this particular object has been configured to have its code block interpretation occur every other frame. It also shows the performance of more than one event block interpretation for that object during the second frame. The following timeline shows the same 6 frames of execution in terms of the times elapsed for all interpretations of each existing object's bytecode; in this particular instance, there are only 2 existing objects.

File:Goolinterp2c.png

733x733px

Stack Frame (incomplete)

A new stack frame is created for an object immediately prior to an interpretation of its bytecode. It is also created when jumping to and linking a bytecode routine via the JAL instruction. An object's initial stack frame is created when it enters its initial state, and is recreated for each subsequent state change (after the unwinding the stack). The initial stack frame is used for the object's code block interpretation. At any given point in time, an object's frame pointer and stack pointer, respectively, locate the beginning and end of its current stack frame.

Format

A stack frame has the following format:

Offset	Field	Size	Value
-0x4 x a	**Argument a	4 bytes	*
0x0	Preserved Interpreter Mode Flags	4 bytes	0xFFFF for initial frame; * otherwise
0x4	Preserved Program Counter	4 bytes	*
0x8	Preserved Frame Pointer Relative Offset	2 bytes	f
0xA	Preserved Stack Pointer Relative Offset	2 bytes	s
0xC	Frame Data	* x 4 bytes	*

(**Arguments come before frames and are not actually 'part' of them)

Initial Stack Frame

When the object is first created/spawned, or when it changes state, its program counter is pointed to the code block with offset pccode (given by the state descriptor for its initial or new state), its frame pointer is cleared, and its stack pointer is reset to its initial location:

File:Goolinterp3b.png

646x646px

The object's initial stack frame is then [re]created by pushing the following sequence of values to the stack:

• 0x0000FFFF - Interpreter Mode Flags. Not an actual interpreter mode flags value but rather an indicator that an unwinding of this frame shall not restore interpreter mode flags.
• obj->pc - Program Counter. At this point, it points to the code block for the object's initial/new state.
• (((unsigned long)obj->fp - (unsigned long)&obj->self) << 16) | ((unsigned long)obj->sp - (unsigned long)&obj->self)) Frame Pointer and Stack Pointer relative offsets. At this point, frame pointer (obj->fp) is 0 and stack pointer points to its initial location; this combined value should be of the form 0x0000****.

The object's frame pointer is then pointed to the beginning of that frame. With these values having been pushed to its stack, the object's stack pointer now points to the end of that frame. Thus, immediately following the instantiation or state change, the object's current stack frame is its initial stack frame.

File:Goolinterp3d.png

756x756px

During the object's code block interpretation, this frame is then extended with additional data, including stack operands and/or the results of interpreted instructions.

Non-Initial Stack Frame

After an object's initial stack frame is created, but before its next code block interpretation occurs, several other non-code block interpretations may be performed. Immediately prior to performing any of these interpretations, a new stack frame is created on top of the initial stack frame, and then the current program counter value (which contains the code block location) is replaced with the location of the non-code block. This frame is created by pushing the following sequence of values to the stack:

• modeflags - Interpreter Mode Flags
• obj->pc - Program Counter. At this point, it points to the code block for the object's initial/new state.
• (((unsigned long)obj->fp - (unsigned long)&obj->self) << 16) | ((unsigned long)obj->sp - (unsigned long)&obj->self)) Frame Pointer and Stack Pointer relative offsets. At this point, frame pointer points to the beginning of the initial frame, and stack pointer points to the end of the initial frame.

The object's frame pointer is then pointed to the beginning of that frame. With these values having been pushed to its stack, the object's stack pointer now points to the end of that frame. Thus, immediately following the creation of the frame, it is the object's current stack frame-that is, the initial stack frame is no longer the current stack frame.

File:Goolinterp3e.png

573x573px

When the following interpretation finishes, the object's program counter is restored to the code block location preserved in the current frame, and the preserved frame pointer and stack pointer offsets are used to restore the initial stack frame as the current frame.

UNFINISHED

[***also, do something with this: (*the ensuing head block interpretation begins at the location referenced by pchead, but preserved from before it is cleared; the interpretation actually occurs after the field is cleared.)]

Immediately prior to a subsequent non-code block interpretation, the new stack frame is actually created on top of the initial stack frame. This includes preserving the object's program counter, with the pccode/code block location, in the new frame. The program counter is then pointed to the [non-code] block location, which replaces its current value (i.e. the code block location), and interpretation begins. When the interpretation finishes, the object's program counter is restored to the code block location preserved in the frame created [for the interpretation], and the stack is unwound of that frame.

GOOL Instruction Table

Opcode	Name	Encoding/Format	Explicit GOOL ops in	Explicit IMM. ops in	Implicit STACK ops in	Operation	Implicit STACK out	Explicit GOOL ops out	Description
0/0x00	ADD	00000000RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L + R	O		add
1/0x01	SUB	00000001RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L - R	O		subtract
2/0x02	MUL	00000010RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L * R	O		multiply
3/0x03	DIV	00000011RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L / R	O		divide
4/0X04	CEQ	00000100RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (L == R), O = ((L ^ R) == 0)	O		check if equal
5/0x05	ANDL	00000101RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (L && R), O = (L ? (R > 0) : 0)	O		logical and
6/0x06	ORL	00000110RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (L || R)	O		logical or
7/0x07	ANDB	00000111RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L & R	O		bitwise and
8/0x08	ORB	00001000RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L | R	O		bitwise or
9/0x09	SLT	00001001RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L < R	O		set less than
10/0x0A	SLE	00001010RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (L <= R)	O		set less than or equal
11/0x0B	SGT	00001011RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L > R	O		set greater than
12/0x0C	SGE	00001100RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (L >= R)	O		set greater than or equal
13/0x0D	MOD	00001101RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L % R	O		modulo
14/0x0E	XOR	00001110RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = L ^ R	O		exclusive or
15/0x0F	TST	00001111RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = (((L & R) ^ R) == 0)	O		test bit
16/0x10	RND	00010000AAAAAAAAAAAABBBBBBBBBBBB	A,B			O = B+(rand() % (A - B))	O		random
17/0x11	MOVE	00010001SSSSSSSSSSSSDDDDDDDDDDDD	S			D = S		[D]	move data
18/0x12	NOTL	00010010SSSSSSSSSSSSDDDDDDDDDDDD	S			D = (S == 0)		D	logical not
19/0x13	PATH	00010011AAAAAAAAAAAABBBBBBBBBBBB	(A),B	R = 0x100	[R,A]	varies	P	B	path progress
20/0x14	LEA	00010100SSSSSSSSSSSSDDDDDDDDDDDD	S			D = &S		D	load effective address
21/0x15	SHA	00010101RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = ((R < 0) ? (L >> -R) : (L << R))	O		arithmetic shift
22/0x16	PSHV	00010110AAAAAAAAAAAABBBBBBBBBBBB	[A,[B]]			[arg_buf = A] I = A; J = B;	[I,[J]]		push value to stack
23/0x17	NOTB	00010111SSSSSSSSSSSSDDDDDDDDDDDD				D = ~S		D	bitwise not
24/0x18	MOVC	000110000000RRRRRRIIIIIIIIIIIIII		R,C		see docs	O		move code pointer
25/0x19	ABS	00011001SSSSSSSSSSSSDDDDDDDDDDDD	S			D = (S < 0) ? -S: S		D	absolute value
26/0x1A	PAD	00011010000TDDDDSSPPBBBBBBBBBBBB		B,P,S,D,T		O = testctrls(instr,0)	O		test controller buttons
27/0x1B	SPD	00011011VVVVVVVVVVVVBBBBBBBBBBBB	V,B			S = B + ((V*gvel) >> 10)	S		calculate speed
28/0x1C	MSC	00011100PPPPSSSSSLLLXXXXXXXXXXXX	X	P,S,L		various; see docs	***	***	multi-purpose
29/0x1D	PRS	00011101PPPPPPPPPPPPDDDDDDDDDDDD	P,D			large calc; see docs	O		driven sine wave
30/0x1E	SSAW	00011110DDDDDDDDDDDDPPPPPPPPPPPP	M,P			O = (M + frameCount) % P	O		synchronized saw wave
31/0x1F	RGL	00011111000000000000IIIIIIIIIIII	I			O = globals[I >> 8]	O		read global variable
32/0x20	WGL	00100000SSSSSSSSSSSSIIIIIIIIIIII	I,S			globals[I << 8] = *S			write global variable
33/0x21	ANGD	00100001RRRRRRRRRRRRLLLLLLLLLLLL	L,R			O = angdist(L,R)			angle between
34/0x22	APCH	00100010RRRRRRRRRRRRLLLLLLLLLLLL	L,(R)	S = 0x100	[R,S]	O = approach(L,R,S)	O		approach a value
35/0x23	CVMR	00100011000IIIIIILLL000000000000		I,L		O = obj.link[L].colors[I]			color vector or matrix read
36/0x24	CVMW	00100011000IIIIIILLLCCCCCCCCCCCC	C	I,L		obj.link[L].colors[I] = C			color vector or matrix write
37/0x25	ROT	00100101RRRRRRRRRRRRLLLLLLLLLLLL	L,(R)		[R,S]	O = rotate(L,R,S,0)	O		approach an angle
38/0x26	PSHP	001001100AAAAAAAAAAABBBBBBBBBBBB	[A,[B]]			I = &A; J = &B;		[I,[J]]	push pointer to stack
39/0X27	ANID	00100111FFFFFFFFFFFFDDDDDDDDDDDD	F			D=&obj.global.anim[F>>5]		D	set animation
128/0x80	DBG	10000000RRRRRRRRRRRRLLLLLLLLLLLL	L,R						debug print ops (beta only)
129/0x81	NOP	10000001000000000000000000000000							no operation
130/0x82	CFL	10000010TTCCRRRRRRIIIIIIIIIIIIII		T,C,R,I					general control flow
	BRA	100000100000RRRRRRVVVVIIIIIIIIII		R,V,I					branch
	BNEZ	100000100001RRRRRRVVVVIIIIIIIIII		R,V,I					branch not equal zero
	BEQZ	100000100010RRRRRRVVVVIIIIIIIIII		R,V,I					branch equal zero
	CST	100000100100RRRRRRSSSSSSSSSSSSSS		R,S					change state
	CSNZ	100000100101RRRRRRSSSSSSSSSSSSSS		R,S					change state not zero
	CSEZ	100000100110RRRRRRSSSSSSSSSSSSSS		R,S					change state equal zero
	RET	100000101000RRRRRRIIIIIIIIIIIIII		R,I					return
131/0x83	ANIS	10000011HHTTTTTTSSSSSSSSSFFFFFFF		F,S,T,H			W		change animation sequence
132/0x84	ANIF	10000100HHTTTTTTFFFFFFFFFFFFFFFF	F	T,H			W		change animation frame
133/0x85	VECA	10000101CCCTTTBBBAAAVVVVVVVVVVVV	V	T,A,B,C			*	**	multi-purpose vector calcs
134/0x86	JAL	10000110VVVV000000IIIIIIIIIIIIII		I,V					jump and link
135/0x87	EVNT	10000111LLLAAARRRRRREEEEEEEEEEEE	E	L,A,R					send an event
136/0x88	RSTT	10001000TTCCRRRRRR**************		R,C,T,*	**				state return guard = true variant
137/0x89	RSTF	10001001TTCCRRRRRR**************		R,C,T,*	**				state return guard = false variant
138/0x8A	CHLD	10001010AAAATTTTTTTTSSSSSSCCCCCC		C,T,S,A	[C], arg[0 to A]				spawn children objects
139/0x8B	NTRY	10001011TTTTTTTTTTTTEEEEEEEEEEEE		T,E					multi-purpose page operation
140/0x8C	SNDA	10001100AAAAAAAAAAAABBBBBBBBBBBB	A,B						adjust audio levels
141/0x8D	SNDB	10001101VVVVRRRRRRSSSSSSSSSSSSS							play sound effect
142/0x8E	VECB	10001110CCCTTTBBBAAAVVVVVVVVVVVV	V	T,A,B,C					multi-purpose vector calcs
143/0x8F	EVNB	10001111LLLAAARRRRRREEEEEEEEEEEE	E	L,A,R					broadcast an event
144/0x90	EVNU	10010000LLLAAARRRRRREEEEEEEEEEEE	E	L,A,R					send event unknown variant
145/0x91	CHLF	10100000AAAATTTTTTTTSSSSSSCCCCCC		C,T,S,A	[C], arg[0 to A]				spawn children objects; no replacement if obj pool full

Specification Format	A	AAAAAAAAAAAA	AAAA	AAA (EVNT/EVNU/EVNB)	AAA (VECA/VECB)
Name		Value A	Argument Count	Argument Count	Vector A Index
Specification Format	B	BBBBBBBBBBBB	BBBBBBBBBBBB (PAD)	BBBBBBBBBBBB (SPD)	BBB
Name		Value B	Controller Buttons	Base Speed	Vector B Index
Specification Format	C	CCCCCCCCCCCC	CCCCCC	CCC	CC
Name		Color Value	Spawn Count	Vector C Index	Conditional Check Type
Specification Format	D	DDDDDDDDDDDD	DDDDDDDDDDDD (PRS)	DDDD
Name		Destination	Wave Phase	Directional Buttons
Specification Format	E	EEEEEEEEEEEE (NTRY)	EEEEEEEEEEEE (EVNT/EVNU/EVNB)
Name		Entry	Event
Specification Format	F	FFFFFFFFFFFFFFFF	FFFFFFFFFFFF	FFFFFFF
Name		Animation Frame	Animation Descriptor Offset	Animation Frame
Specification Format	H	HH
Name		Horizontal Flip
Specification Format	I	IIIIIIIIIIIIII	IIIIIIIIIIII	IIIIIIIIII	IIIIII
Name		Immediate Code Location	Global Variable Index	Immediate Branch Offset	Color Index
Specification Format	L	LLLLLLLLLLLL	LLL
Name		Left Operand	Object Link Index
Specification Format	P	PPPPPPPPPPPP	PPPP	PP
Name		Wave Period	Primary Operation Subtype	Primary Check Type
Specification Format	R	RRRRRRRRRRRR	RRRRRR
Name		Right Operand	Object Register Index
Specification Format	S	SSSSSSSSSSSSSS	SSSSSSSSSSSS	SSSSSSSSS	SSSSSS
Name		State	Source	Animation Sequence Index	Subtype
Specification Format		SSSSS	SS
Name		Secondary Operation Subtype	Secondary Check Type
Specification Format	T	TTTTTTTTTTTT	TTTTTTTT	TTTTTT	TTT
Name		Operation Subtype	(Object) Type	Time	Operation Subtype
Specification Format		TT	T
Name		Operation Subtype	Truth Invert Toggle
Specification Format	V	VVVVVVVVVVVV	VVVV	VVVV (SNDB)
Name		Velocity	Variable Count	Volume

State Return Instruction Table

Opcode	Name	Encoding/Format	Explicit IMM. ops in	Description
136/0x88	RSTT	10001000TTCCRRRRRR**************	R,C,T,*	state return guard = true variant
	RST	100010000100RRRRRRSSSSSSSSSSSSSS	R,S	state return guard = true
	RSNT	100010000101RRRRRRSSSSSSSSSSSSSS	R,S	state return if nonzero guard = true
	RSZT	100010000110RRRRRRSSSSSSSSSSSSSS	R,S	state return if equal zero guard = true
	RSCT	100010000111RRRRRRSSSSSSSSSSSSSS	R,S	state return eval prev cond guard = true
	RNT	100010001000RRRRRRxxxxxxxxxxxxxx	R	null return guard = true
	RNNT	100010001001RRRRRRxxxxxxxxxxxxxx	R	null return if nonzero guard = true
	RNZT	100010001010RRRRRRxxxxxxxxxxxxxx	R	null return if equal zero guard = true
	RNCT	100010001011RRRRRRxxxxxxxxxxxxxx	R	null return eval prev cond guard = true
	GDT	100010001100RRRRRRxxxxxxxxxxxxxx	R	guard = true
	GNT	100010001101RRRRRRxxxxxxxxxxxxxx	R	if nonzero guard = true
	GZT	100010001110RRRRRRxxxxxxxxxxxxxx	R	if equal zero guard = true
	GCT	100010001111RRRRRRxxxxxxxxxxxxxx	R	eval prev cond guard = true
	GBNT	100010000001RRRRRRVVVVIIIIIIIIII	R,V,I	if nonzero guard = true else branch
	GBZT	100010000010RRRRRRVVVVIIIIIIIIII	R,V,I	if equal zero guard = true else branch
137/0x89	RSTF	10001001TTCCRRRRRR**************	R,C,T,*	state return guard = false variant
	RSF	100010000100RRRRRRSSSSSSSSSSSSSS	R,S	state return guard = false
	RSNF	100010000101RRRRRRSSSSSSSSSSSSSS	R,S	state return if nonzero guard = false
	RSZF	100010000110RRRRRRSSSSSSSSSSSSSS	R,S	state return if equal zero guard = false
	RSCF	100010000111RRRRRRSSSSSSSSSSSSSS	R,S	state return eval prev cond guard = false
	RNF	100010001000RRRRRRxxxxxxxxxxxxxx	R	null return guard = false
	RNNF	100010001001RRRRRRxxxxxxxxxxxxxx	R	null return if nonzero guard = false
	RNZF	100010001010RRRRRRxxxxxxxxxxxxxx	R	null return if equal zero guard = false
	RNCF	100010001011RRRRRRxxxxxxxxxxxxxx	R	null return eval prev cond guard = false
	GDF	100010001100RRRRRRxxxxxxxxxxxxxx	R	guard = false
	GNF	100010001101RRRRRRxxxxxxxxxxxxxx	R	if nonzero guard = false
	GZF	100010001110RRRRRRxxxxxxxxxxxxxx	R	if equal zero guard = false
	GCF	100010001111RRRRRRxxxxxxxxxxxxxx	R	eval prev cond guard = false
	GBNF	100010000001RRRRRRVVVVIIIIIIIIII	R,V,I	if nonzero guard = false else branch
	GBZF	100010000010RRRRRRVVVVIIIIIIIIII	R,V,I	if equal zero guard = false else branch